7/8" Corrugated Panles

Stainless & Aluminum

The 7/8" Corrugated Panel is a siding product that also has limited applications as a roofing product. This panel is an industry standard and is available in painted and bare aluminum and painted and coated steel. The 7/8" is also available in stainless steel.

 

Gage	Weight #/SQR.	I (in4/ft)	Sp (in3/ft)	Sn (in3/ft)	Download
24	140	0.0621	0.1039	0.1108
22	170	0.0822	0.1423	0.1496
20	200	0.1026	0.1832	0.1899
18	262	0.1367	0.2571	0.2571
Metal Specification: 35,000 PSI Minimum Yield Strength.

 

2.67" x 7/8" CORRUGATED SUGGESTED UNIFORM ROOF LOADS IN POUNDS PER SQ. FOOT
GA	SPAN	4'0"	4'6"	5'0"	5'6"	6'0"	6'6"	7'O"	7'6"	8'0"	8'6"	9'0"	9'6"	10'0"
18 stl.	1 3	138 171	108 135	88 110	73 91	61 76	53 65	45 56	39 49	34 43	30 38	27 34	24 30	22 27
20 stl.	1 3	109 136	86 107	69 88	58 72	48 60	41 50	35 44	32 38	27 34	24 30	21 27	19 24	17 21
22 stl.	1 3	72 89	58 73	48 60	40 50	33 43	29 37	26 32	22 28	20 25	18 22	16 20	18
24 stl.	1 3	73 91	58 72	47 59	39 49	33 41	27 35	24 30	21 27	18 23	16 20	18	16
26 stl.	1 3	72 90	57 70	46 58	38 48	32 40	27 34	23 29	20 25	18 22	16 20	17	16
.032 alum.	1 3	72 91	57 72	46 58	38 48	31 39	27 34	23 29	20 26	18 23	16 21	18
Notes: 1. Loads shown based on stress governed per AISC specs. 2. 26 GA., 24 GA. material 50,000 PSI yield strength. (WC) 3. 20 GA. And 18 GA. material 37,000 PSI yield strength. (NC) 4. For (NC) 24 GA. and 22 GA. material at 37,000 PSI multiply loads shown by .74. 5. Loads shown may be increased by 1/3 for wind loading.